Broudy Precision is excited to offer the Johnson Controls TSX Primary Air Valve Assembly. A retrofit damper for the VariTrane or VariTrac damper assemblies, piston or plunger type.
Air Valve Assembly Features:
- Complete one piece assembly
- Butterfly damper with seals
- Controls enclosure included, controls transformer optional
- Diamond Star Air Flow Sensor, 8″ box and above
- Cost effective solution
Superior Design
The 22 gauge round air valve is the heart of variable air volume terminals. An automated manufacturing process produces damper blades to exacting specifications. The dampers are designed for low noise operation with minimal friction loss and a tight closure seal. Air valve leakage is less than 1% of rated capacity at 3″ W.G. inlet pressure.
Solid Molded Damper Shaft
The solid damper shaft is molded using a high-impact, high-strength composite material. It is designed to eliminate condensation on the extended portion that penetrates the unit casing. The shaft allows a more secure attachment to the damper actuator, since set screws adhere to this material better than metal. The high impact material gives the shaft superior impact strain resistance compared to cast metal shafts.
The damper blade is mounted on the damper shaft and connected by means of an integral molded sleeve. The shaft rotates in low friction self lubricating bearings.
The primary air valve and damper shaft meet the criteria for UL 1995, UL 723, UL 94, NFPA 90A and B, NFPA 255, and ASTM E84.
